PM-300D

MOTORIZED GATES

One-way swinging gate with suitable width dimensions for the pas- sage of people with reduced mobility, suppliers or for the emergency evacuation exit. Once it received the opening order through a remote push button or validation reader, the panel automatically swings 90o. Once access has taken place, it closes again according to a timer. This model is suitable for both indoors and outdoors installations always controlled by security personnel.

Validation

  • Remote push-button operated equipment or any type of validation system, located on a possible additional pedestal.
  • Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.

Passage

  • Motorized operation, with automatic timed closing.
  • Unidirectional passage control.
  • Single or double version available, depending on model.

Security

Safety system to prevent the panel from being hit in the event of obstruction of the panel rotation before the end of its cycle.

. This gate has a mechanical anti-panic system that unlocks the mechanism with a pressure of 1 to 30 kilos, leaving the passage free. Another safety system available as an option is the electrical release in the event of a power cut, leaving the gate in the open position

ManuFacturing

  • Made of AISI-304 or AISI-316 stainless steel.
  • Door with hinged panel made of bright polished stainless steel tube with a methacrylate plate in the central part.
  • Top cover with security lock to access the mechanism.
  • Side door with security lock to access to the electronics.

Electronics

  • Universal power supply range. (100- 240 VAC 50/60 Hz).
  • Easy configuration of the main parameters of the equipment via switches.
  • Upgradable firmware for new functionalities.

Installation

The access gate pedestal is floor fixed using the base plate and screws with expansion plugs that are supplied with the unit. The power and signaling cable pass through the center of the access gate’s base.

In installations where the equipment has to be placed next to a wall, a space of about 3 cm must be left between the two to be able to open the top cover

SaFEty conditions

In case of a power cut, the barrier panel unblocks allowing upwards of 20 kg free exit.

There is an electrical anti-panic system that automatically opens the panel in the event of a power cut, leaving the space clear for an evacuation.

oPEration

When a pulse is sent from a card reader or pushbutton, the access gate opens, always in one direction at an angle of 90o. Then, it is closed again by a timer action.

to bE ProVidEd by thE buyEr

  • Electrical power supply.
  • Electrical wiring for power supply, command and control.
  • Adequacy of the floor where it is to be installed.

Validation

  • Remote push-button operated equipment or any type of validation system, located on a possible additional pedestal.
  • Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.

Passage

  • Motorized operation, with automatic timed closing.
  • Unidirectional passage control.
  • Single or double version available, depending on model.

Security

Safety system to prevent the panel from being hit in the event of obstruction of the panel rotation before the end of its cycle.

. This gate has a mechanical anti-panic system that unlocks the mechanism with a pressure of 1 to 30 kilos, leaving the passage free. Another safety system available as an option is the electrical release in the event of a power cut, leaving the gate in the open position

ManuFacturing

  • Made of AISI-304 or AISI-316 stainless steel.
  • Door with hinged panel made of bright polished stainless steel tube with a methacrylate plate in the central part.
  • Top cover with security lock to access the mechanism.
  • Side door with security lock to access to the electronics.

Electronics

  • Universal power supply range. (100- 240 VAC 50/60 Hz).
  • Easy configuration of the main parameters of the equipment via switches.
  • Upgradable firmware for new functionalities.

Installation

The access gate pedestal is floor fixed using the base plate and screws with expansion plugs that are supplied with the unit. The power and signaling cable pass through the center of the access gate’s base.

In installations where the equipment has to be placed next to a wall, a space of about 3 cm must be left between the two to be able to open the top cover

SaFEty conditions

In case of a power cut, the barrier panel unblocks allowing upwards of 20 kg free exit.

There is an electrical anti-panic system that automatically opens the panel in the event of a power cut, leaving the space clear for an evacuation.

oPEration

When a pulse is sent from a card reader or pushbutton, the access gate opens, always in one direction at an angle of 90o. Then, it is closed again by a timer action.

to bE ProVidEd by thE buyEr

  • Electrical power supply.
  • Electrical wiring for power supply, command and control.
  • Adequacy of the floor where it is to be installed.

Data sheet

ConceptoValor
Material (Body)A/Inox. AISI-316 or AISI 316 Stainless steel
Power supply100-240 VAC 50/60Hz
Working voltage24 VDC
Operating temperature-10º a + 50º
Maximum Consumption / Rest80 W
Humidity (non-condensing)90%
Net weight50 kg
Security levelDeterrent

* El Consumo Máximo indicado no tiene en cuenta accesorios opcionales.

CABINET ADAPTATIONS

Possibility of adapting the panel length up to the recommended limits.

Possibility of painting the equipment in different colours according to RAL chart.

PROTECTION FOR OUTDOORS

Possibility of incorporating electronic protection and sealing for outdoor equipment. Outdoor protective canopy.

WHEN SALINE, CORROSIVE, HUMID OR CHE- MICAL ENVIRONMENTS ARE PRESENT

AISI 316 Stainless Steel.

SECURITY

Emergency battery kits.

COMPLEMENTS

Console with pushbuttons and/or switches for remote control and control of the passage directions.

Posts or totems to house validation systems and/or pictograms.

Fixed or removable handrails for enclosing or forming walkways.

PM-300D

BLUEPRINTS