TR-8215S
Turnstiles
Waist-height turnstile formed by a cabinet that supports a tripod arm set. It controls the acces by rotating an arm, which is pushed by the user and at each 120o turn, allows the passage of one person at a time, with one of the arms always remaining in the closed position. This model is efective at managing large crowds and suitable for both indoors and outdoors installations with some level of supervision.
Validation
-
Compatible with any type of validation system.
-
Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.
PASSAGE
- Mechanical, electromechanical or motorized mechanism with automatic rotation, depen- ding on the model.
- Unidirectional or bidirectional passage control.
- Single or double version available, depending on model.
- Self-centering system to ensure full rotation to the initial position and shock absorption system for smooth operation.
SECURITY
- Fixed rotating tripod arm or electric emergency collapsible arm.
- Anti-backup ratchet to prevent reverse rotation.
MANUFACTURING
- Cabinet and arms made of AISI-304 or AISI-316 stainless steel, 1.5 mm thick, with satin and polished gloss finish, respectively.
- Side doors and covers with security locks for easy and secure access, maintenance and installation.
- Cataphoresis treated parts and bearings lubricated for life.
ELECTRONICS
- Universal power supply range. (100- 240 VAC 50/60 Hz).
- Easy configuration of the main parameters of the equipment via switches. .
- Upgradable firmware for new functionalities.
INSTALLATION
Floor mounting using base plates fixed with screws and anchor bolts. These screws and anchor bolts are supplied with the turnstile.
SAFETY CONDITIONS
When the power supply is interrupted, the panic or emergency arm system allows the closing arm to be released, swung and collapsed.In this way, the passageway is immediately free and ready for possible evacuation.
OPERATION
Each passage allows for different modes of operation. The most significant are:
a. Free access.
b. Controlled access, with electric opening by any type of validation system.
c. Closed access.
TO BE PROVIDED BY THE BUYER
- Electrical power supply.
- Electrical wiring for power supply, command and control.
- Adequacy of the floor where it is to be installed.
Validation
-
Compatible with any type of validation system.
-
Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.
PASSAGE
- Mechanical, electromechanical or motorized mechanism with automatic rotation, depen- ding on the model.
- Unidirectional or bidirectional passage control.
- Single or double version available, depending on model.
- Self-centering system to ensure full rotation to the initial position and shock absorption system for smooth operation.
SECURITY
- Fixed rotating tripod arm or electric emergency collapsible arm.
- Anti-backup ratchet to prevent reverse rotation.
MANUFACTURING
- Cabinet and arms made of AISI-304 or AISI-316 stainless steel, 1.5 mm thick, with satin and polished gloss finish, respectively.
- Side doors and covers with security locks for easy and secure access, maintenance and installation.
- Cataphoresis treated parts and bearings lubricated for life.
ELECTRONICS
- Universal power supply range. (100- 240 VAC 50/60 Hz).
- Easy configuration of the main parameters of the equipment via switches. .
- Upgradable firmware for new functionalities.
INSTALLATION
Floor mounting using base plates fixed with screws and anchor bolts. These screws and anchor bolts are supplied with the turnstile.
SAFETY CONDITIONS
When the power supply is interrupted, the panic or emergency arm system allows the closing arm to be released, swung and collapsed.In this way, the passageway is immediately free and ready for possible evacuation.
OPERATION
Each passage allows for different modes of operation. The most significant are:
a. Free access.
b. Controlled access, with electric opening by any type of validation system.
c. Closed access.
TO BE PROVIDED BY THE BUYER
- Electrical power supply.
- Electrical wiring for power supply, command and control.
- Adequacy of the floor where it is to be installed.
Data sheet
| Concepto | Valor |
|---|---|
| Material | AISI 304 or 316 Stainless Steel |
| Power supply | 100-240 VAC 50/60 Hz |
| Circuit Breaker | 6A |
| Working voltage | 24 VDC |
| Maximum Consumption / Rest | 30 W |
| Operating temperature | 15º to + 50º |
| Humidity | 90% |
| Net weight | 45 Kg. |
| Security level | Deterrent |
| Steps / minute | Up to 45 |
* El Consumo Máximo indicado no tiene en cuenta accesorios opcionales.
CABINET ADAPTATIONS
1. Adaptation of readers on the surface or inside the cabinet, depending on its dimensions and characteristics.
2. Possibility of making adaptations to the cabi- net, according to the customer’s needs.
SECURITY
Alarm systems to detect fraudulent passage under and over the tripod arm, with the possibility of a sensor in the cover to detect an attempt to jump.
VISIBILITY AND AESTHECTICS
1. Indicative pictograms
2. Front pictograms.
3. LED strips.
4. Top cover available in different materials
5. Possibility of painting the equipment in different colours according to RAL chart.
PROTECTION FOR OUTDOORS
This is the only way to guarantee the correct opera- tion of the equipment outdoors
1. Exterior sealing.
2. Electronics protection.
3. Outdoor protective canopy
4. AISI 316 stainless steel for outdoor and indoor environments where humidity, salinity and/or corrosion are present.
COMPLEMENTS
See accessories section in the general catalogue.
1. Capacity control systems integrated in the equipment itself or through software to be installed on PC or Tablet.
2. Passage counters, card-collecting boxes and command and control consoles.
3. Posts or posts.
4. Fixed or removable railings for enclosing or for forming walkways.
TR-8215S
BLUEPRINTS
Popover content